Analog Output AO895 3BSC690087R1 AINT-14C AINT-02C AINP-01C AIBP-51 with 1 warranty

Product Description

Analog Output AO895 3BSC690087R1 AINT-14C AINT-02C AINP-01C AIBP-51

Product Description

AO895 3BSC690087R1 Overview

The AO895 Analog Output Module has 8 channels. The module includes Intrinsic Safety protection components and a HART interface on each channel for connection to process equipment in hazardous areas without the need for additional external devices.

Each channel can drive up to 20 mA loop current into a field load such as an Ex-certified current-to-pressure converter and is limited to 22 mA in overload conditions. All eight channels are isolated from the ModuleBus and power supply in one group. Power to the output stages is converted from the 24 V on the power supply connections.

AO895 3BSC690087R1 Dimensions

Width	45 mm (1.77")
Depth	102 mm (4.01"), 111 mm (4.37") including connector
Height	119 mm (4.7")
Weight	0.2 kg (0.44 lbs.)

AO895 3BSC690087R1 Features and benefits
• 8 channels of 4...20 mA outputs.
• HART communication.
• 1 group of 8 channels isolated from ground.
• Power to drive Ex certified I/P actuators.

AO895 3BSC690087R1 General info

Article number	3BSC690087R1
Type	Analog Output
Signal specification	4...20 mA
Signal type	Unipolar single ended
Mechanics	S800

 

The AO895 Analog Output Module has 8 channels. The module includes Intrinsic Safety protection components and HART interface on each channel for connection to process equipment in hazardous areas without the need for additional external devices.

Each channel can drive up to 20 mA loop current into a field load such as an Ex certified current-to-pressure converter and is limited to 22 mA in overload conditions.
All eight channels are isolated from the ModuleBus and power supply in one group. Power to the output stages is converted from the 24 V on the power supply connections.

Five LEDs indicate module status Fault (Red), Run (Green), OSP (Yellow), Warning (Yellow) and Tx. The RUN LED indicates normal operation and the WARNING LED indicates if any error input is active. The FAULT LED indicates that the module is in Init state or Not configured state. In Not configured state the FAULT LED is turned off after the first valid access to the module. The OSP LED is turned on when the output is set to the predetermined OSP value.

The module performs self-diagnostic checks cyclically. Module diagnostics include: Process power supply supervision which is reported when supply voltage to the  output circuitry is too low. This error is reported but the module will continue to function within the power supply limits because the output current is supervised. Channel diagnostics include: Fault detection of the channel (only reported on active channels). Open circuit of the field wiring is only detected if the output set is greater than 1 mA.

The outputs of the module will be set to a predetermined value if the OSP-watchdog timer expires or ordered by the FCI. The watchdog timer which is in the range 256ms-1024ms is used for modulebus supervision. Three different values are possible, 256, 512 and 1024ms. The watchdog timer can also be disabled, which is the default after reset or power-up. The watchdog timer is re-triggered every time the correct node address has been decoded (or broadcast). If the watchdog timer expires or if the SetOSPState command is received, the module enters the OSP state and the active outputs (if any) are set to their OSP values which can be configured as a predefined value or to the last good value sent.

The output values will be kept as long as the module stays in the OSP state. To change the outputs the module first has to leave this state. This is done with an explicit command or if the BLOCK or POWOK signal is activated. When reentering Operational State, the outputs are still kept within their OSP value until new valid values are written.

The reset circuitry gives a reset signal when the module is inserted until the BLOCK signal is inactive and the POWOK signal is active. The BLOCK signal is deactivated when the module lock mechanism is in the locked position. The POWOK comes from the FCI after power is applied.TU890 and TU891 Compact MTU can be used with this module and it enables two wire connection to the process devices without additional terminals. TU890 for Ex applications and TU891 for non Ex applications.

 

AINT-14C Overview
AINT-14C General Information

Product ID	68685826
Type Designation	AINT-14C
Catalog Description	AINT-14C; MC INTERFACE BOARD
Long Description	AINT-14C

AINT-14C Dimensions

Product Net Weight	0.108 kg
Product Net Depth /Length	130 mm
Product Net Height Product Net Width	20 mm 125 mm
Package Level 1 Depth /Length	130 mm
Package Level 1 Height Package Level 1 Width	20 mm 125 mm

A21-23	AGDR-6x/7x Gate Driver Board (A23 is not used with 400 kVA units)	A433	AFPS-11C Fan Power Supply 1 kW	V21-23	IGBT module (V23 is not used with 400 kVA units)
A28*	AFCB-01 Protection board or NRED-16	A435	AHCB-01C Heating Control Board	R21-23	Discharging resistor
A42	AINT-14C Main Circuit Interface Board	C31-33	Filter capacitor set	R321-323	Output filter resistor
A43*	APOW-11C/01 Power Supply Board	C200	DC link capacitor (C251-276 are not used)	R410-413	Heating element
A46	AGBB-01C Gate Driver Branching Board (only with 400 kVA units)	C211-213	Clamp capacitor	U31-33	Current transducer
A311	AOFC-02 Output Filter Board	C221-223	Clamp capacitor	Y41	Fan
A432	AFIN-01C Fan Inverter 1 kW	C231-233	Clamp capacitor	Z1	AOFI-61 Output Filter Inductor

AIBP-51 PRODUCT-DETAILS
AIBP-51 General Information

Product ID	68257913
Type Designation	AIBP-51 SP KIT
Catalog Description	AIBP-51 SP KIT; INPUT BRIDGE CONTROL BOARD
Long Description	AIBP-51 SP KIT

AIBP-51 Dimensions

Product Net Height	0.11 mm
Product Net Length	0.11 mm
Product Net Weight	0.1 kg
Product Net Width	0.11 mm

The S800 I/O can be categorized into:
• Module Termination Units (MTU)
• I/O modules - S800 I/O modules and S800L I/O modules.
S800 I/O modules are designed to be used together with a Module Termination Unit. S800L I/O modules are designed to be directly mounted on a standard DIN rail. The module also contains terminals for connections

 

S800 I/O Product Overview

S800 I/O Introduction
The S800 I/O is distributed as modular I/O that communicates with numerous controllers over Advant Fieldbus 100 (AF100), PROFIBUS-DP, or directly. The S800 I/O provides easy installation of the I/O modules and process cabling. It is highly modularized and flexible so that I/O modules can be combined to suit many applications. The S800 I/O can be mounted in many configurations to fit most requirements.

The S800 I/O provides easy installation of the I/O modules and process cabling. It is highly modularized and flexible so that the I/O modules can be combined to suit many applications, including most types of signals, HART and Intrinsic Safety Interface. The S800 I/O modules and a Fieldbus Communication Interface (FCI) are combined to form an I/O Station. The S800 I/O can be used in both single and redundant applications.
In general, all S800 units are G3 compliant. G3 compliant modules withstand more severe environmental conditions according to ISA-S71.04. The following S800 units are G2 compliant - SD821, SD822, SD823, SD831, SD832, SD833, SD834, SS822, SS832, TB811 and CI830. G3 compliant versions of SD822 and SS822 are also available (refer to SD822Z and SS822Z).
All modules are marked with a bar code that shows the serial number, article ID and the product revision number. A separate bar code strip is also enclosed along with the module for placing on the module, if needed. The bar code is of type Bar-code 128.

How can we help you

1. Wide Product Selection:We offer a diverse range of PLC and DCS system spare parts, encompassing multiple brands and models from leading manufacturers such as Siemens, Bently nevada, Rockwell Automation, and various accessories.
2. Global Supply Chain Network:We have established a robust global supply chain network, maintaining long-term partnerships with suppliers and manufacturers worldwide to ensure stable and timely product availability.
3. Quick Response and Delivery:We prioritize swift quotation responses and order processing, capable of handling urgent customer needs with flexible delivery solutions to meet deadlines effectively.

Whole sale pictures

FAQ

Q: Is your product new or refurbished?
A: All our products are original new with one year warranty.
Q: How many days the goods will arrive my hands if I place the order now?
A: As soon as we receive the payment, I will ship the products immediately.
It usually take 3-5 days from China to your hands.
Q: Could you give me some discount?
A: Contact Stella to get more discount for AO895 3BSC690087R1.
Q:Can you ship the goods to my country?
A: Pls don't worry ,We can ship the goods to worldwide
Q:What payment mothod we used?
A:We usually use T/T (Telegraphic Transfer),and we can received with in 1-2days
Q:Do you have Whatsapp number?
A: Sure,You can contact me.
Q:Can I contact you on Email?
A: You can contact me online to get my email add
 

A-BB	07NG63R1 GJV3074313R1	Process input module	A-BB	1N1346	Controller CPU unit
A-BB	07NG61R1 GJV3074311R1	Analog measurement unit	A-BB	1MRK002247-BHR00	Programmable logic module
A-BB	07MK92 GJR5253300R3161	Digital signal output	A-BB	1MRK002247-AHR05	Logic interface module
A-BB	07KT97 WT97 GJR5253000R4270	Field relay output card	A-BB	1MRK002247-AGR05	Logic processing board
A-BB	07KT94 GJR5252100R3261	Discrete output module	A-BB	1MRK002246-BE	Discrete input unit
A-BB	07KT93 GJR5251300R0171	Logic output interface	A-BB	1MRK002246-BC	Digital input module
A-BB	07KT92 GJR5250500R0262	Switching control card	A-BB	1MRK002239-BB	Relay output card
A-BB	07KT92  GJR5250500R0902 GJR5250500R0262	Digital output unit	A-BB	1MRK002239 SR91C790 1MRK002239-BBR01	Relay control unit
A-BB	07KR91  GJR5250000R0101 GJR5250000R0151	Relay output module	A-BB	1MRK002133-ABR02	Analog output module
A-BB	07KR240 GJV3072402R1	Switching output card	A-BB	1MRK001987-AA	System management module
A-BB	07KP64  GJR5240600R0101	Main control processor	A-BB	1MRK001370-DAR01	Process monitoring unit
A-BB	07KP60R101 GJV3074360R101	System processing module	A-BB	1MRK000614-ABR02	Precision analog input module
A-BB	07EB62R1 GJV3074342R1	Central controller unit	A-BB	1MRK000614-ABR00	Analog measurement board
A-BB	07EA63R1 GJV3074353R1	Control output module	A-BB	1MRK000508-CDR03 1MRK000007-7	Signal output card
A-BB	07EA61R1  GJV3074351R1	Analog acquisition board	A-BB	1MRK000508-BDR04 1MRK000007-21	Switching output module
A-BB	07DI92 WT92 GJR5252400R4101	Process input module	A-BB	1MRK000508-BDR02 1MRK000007-7	Digital output interface
A-BB	07DI92 GJR5252400R0101	Field signal input card	A-BB	1MRK000508-BBR00 508BBRL 1MRK000005-392	I/O control board
A-BB	07DI92  WTDI92 GJR5252400R4101	Logic input interface	A-BB	1MRK000508-BBR00	Output signal card
A-BB	07DC91 GJR5251400R0202	Discrete input unit	A-BB	1MRK000195-AAR02 1MRK000005-63	Relay management unit
A-BB	07DC91  GJR5251400R0202	Binary input module	A-BB	1MRK000173-BCR00	Main processor board
A-BB	07CT41 1SBP260022R1001	Pulse counter module	A-BB	1MRK000173 1MRK000005-396 1MRK000173-BC	Central CPU controller
A-BB	07BT62R1 GJV3074303R1	Communication interface card	A-BB	1MRK000167-GDR00 1MRK000005-258	Field logic interface
A-BB	07AI91 GJR5251600R0278	Analog measurement unit	A-BB	1MRK000167-GCR00 1MRK000005-258	Programmable logic module
A-BB	07AA60R1 GJV3074365R1	Signal output unit	A-BB	1MRK000167-GCR00	Control logic interface
A-BB	07PS62R2	Pulse processing module	A-BB	1MRK000167-GBR00	Logic processing board