| Customization: | Available |
|---|---|
| Usage: | PLC MODULE |
| Type: | New and original |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PLC Module Siemens SITOP 6EP1333-3BA10 6EP1337-3BA00 6EP3337-8SB00-0AY0 A Stabilized power supply
6EP1333-3BA10 Overview
 |
SITOP PSU200M/1-2AC/24VDC/5A SITOP PSU200M 5 A stabilized power supply input: 120/230-500 V AC output: 24V DC/5 A *Ex approval no longer available* |
6EP1337-3BA00 Overview
|
SITOP PSU100M 40 A Stabilized power supply Input: 120/230 V AC Output: 24 V DC/40 A !!!!Phased-out product!!!! Successor: 6EP3337-8SB00- 0AY0 |
6EP3337-8SB00-0AY0 Overview
|
SITOP PSU8200/1AC/24VDC/40A SITOP PSU8200 24 V/40 A stabilized power supply input: 120/230 V AC output: 24V DC/40 A |
SITOP modular 1ph/2ph Overview
The 1-phase/2-phase power supply from the SITOP modular product line is a powerful, stabilized technology power supply for automated machines and systems.
The key benefits of the product include:
- Wide-range input, which allows it to be connected to almost any 1-phase/2-phase line
supply around the world
-Output voltage can be adjusted in the range 24...28.8 V
- Power boost during operation with 300% rated current for 25 ms
- No lateral mounting clearances are required
- Ambient temperature -25 (0)...+70° C
- Selectable short-circuit response (constant current or latching shutdown)
- A soft characteristic can be selected for a parallel connection (for uniform load distribution of power supply units of the same type)
- Display of the operating state via 3 LEDs
- To increase the system availability, these reliable power supplies can be expanded using SITOP supplementary modules (redundancy module, selectivity module, buffer module, signaling module or signaling contact), as well as SITOP DC-UPS modules.
The following device options are available:
| Stabilized power supply unit SITOP modular 1ph/2ph | |
| Type | Order number |
| 120-230/230-500 VAC input, 24 V/5 A output | 6EP1333-3BA10 |
| 120-230/230-500 VAC input, 24 V/10 A output | 6EP1334-3BA10 |
| 120/230 VAC input, 24 V/20 A output | 6EP1336-3BA00 |
| 120/230 VAC input, 24 V /40 A output | 6EP1337-3BA00 |
SITOP modular Device description
SITOP modular is a primary-clocked power supply for connection to a 1-phase/2-phase AC line supply. An electronically regulated DC voltage that can be set via a potentiometer is available at the output of the device. The output of the device is isolated, no-load proof and short-circuit proof. The LED displays indicate the operating state. The integrated signaling
contact (for 6EP1336-3BA00 and 6EP1337-3BA00, only when using the supplementary 6EP1961-3BA10 signaling module) can be used to further process the operating state of the device.
Line input
2. DC output
3. Potentiometer 24...28.8 V
4. Pilot lamps (24 V OK, OVERLOAD, SHUTDOWN)
5. A/B selector switch
6. Voltage selector switch (only for 6EP1333-3BA10 and 6EP1334-3BA10)
7. DIN rail slider
8. Natural convection
9. Clearance above/below
10. Signaling contact (only for 6EP1333-3BA10 and 6EP1334-3BA10)
6EP1333-3BA10 Connections and terminal designation
The line input terminals can be used to establish the connection to the supply voltage.
The output terminals are used to connect to the loads to be supplied (see also Section Installation (Page 33)).
| Connections and terminal designations for 6EP1333-3BA10 and 6EP1334-3BA10 | |
| Line input L1, N (L2), PE | One screw terminal each |
| Output + | 2 screw terminals |
| Output - | 2 screw terminals |
| Signaling contact 13, 14 | One screw terminal each |
| 1 | 2 | 4 | ||
| SZS 0,6 x 3,5 / PZ1 / PH1 | SZS 0,6x3,5 / PZ1 / PH1 | SZS 0,6 x 3,5 | SZS 0,4 x 2,5 / max. 0 3,5 mm | |
| u=i | 1 x 0,05 . 4 mm? | 1 x 0,2 . 4 mm? | 1 x0,14.1,5 mm2 | - |
| & | 1 x 0,05 . 4 mm? | 1 x 0,2 - 2,5 mm2 | 1 x 0,14 -1,5 mm2 | . |
| AWG | 30-11 | 24-12 | 28-16 | - |
| Nm | 0,5 Nm | 0,5 . 0,6 Nm | 0,22 Nm | 0,04 Nm F |
| L - | 6,5 - 7 mm | 8 mm | 7 mm | - |
*1)Do not subject the end stop to higher loads
Figure 2-2 Terminal data for 6EP1333-3BA10 and 6EP1334-3BA10
Parallel operation:
'Soft' characteristic curve (see, e.g. Figure 6-10 6EP1333-3BA10 parallel operation output characteristic (Page 43)) for the parallel operation of two or more devices: The output voltage falls with increasing output current (namely, also for the overcurrent pulse!). This means that for full output current the highest output voltage can normally no longer be attained.
| SITOP modular | Line-side protection recommended for 1-phase operation or required for 2-phase operation |
| 6EP1333-3BA10 (24 V/5 A) |
• 1-phase operation: Miniature circuit breaker (IEC 898), characteristic C (B), 6 A (10 A) • 2-phase operation: 2-pole coupled miniature circuit breaker (IEC 898), characteristic C (B), 6 A (10 A) or for 230 V 3RV2011-1EA10 circuit breaker, setting of the thermal current limiter: 3.8 A or 3RV2711-1ED10 circuit breaker (branch circuit protection according to UL 489) or for 400/500 V 3RV2011-1DA10 circuit breaker, setting of the thermal current limiter: 3 A or 3RV2711-1DD10 circuit breaker (branch circuit protection according to UL 489) |
6EP1337-3BA00 Potentiometer
The potentiometer on the front of the device is used to set the output voltage. The output voltage is set to 24 V in the factory and can be adjusted in the range 24...28.8 V; for example, to compensate voltage drops across long supply lines to the connected load.
Figure 2-5 Potentiometer (example of 6EP1337-3BA00)
The selector switch as delivered is in the 230 V position. It must be moved to the appropriate position for operation in the 120 V range. The selector switch can only be actuated in the deenergized state.
To switch the input voltage range for 6EP1336-3BA00 (24 V/20 A) and 6EP1337-3BA00 (24 V/40 A) to 120 V, a wire jumper must be connected to the input terminal, Jump 120 V AC. This must be dimensioned as for the power supply cable with regard to crosssection and insulation. The length must not exceed 100 mm.
Figure 2-8 Voltage selector switch (example, 6EP1334-3BA10)
6EP1337-3BA00 Line-side connection
The SITOP modular power supply is designed for connection to a 1-phase/2-phase AC line supply (TN, TT or IT system according to VDE 0100 T 300 / IEC 364-3) with a rated voltage of 120-230/230-500 VAC or 120/230 VAC, 50/60 Hz.
The line supply is connected using terminal L1, L2(N) and PE (see Figure 5-1 Line connection (example, 6EP1334-3BA10 and 6EP1337-3BA00) (Page 33)), and must be implemented according to IEC 60364 and EN 50178 .
The switch must be changed over for operation with 120 V input voltage for 6EP1333-3BA10 and 6EP1334-3BA10 (see Figure 2-8 Voltage selector switch . A wire jumper must be connected to the input terminal Jump 120 V AC for 6EP1336-3BA00 and 6EP1337-3BA00 .A protective device (miniature circuit-breaker or circuit-breaker) and a disconnection unit for the power supply must be provided. A ground-fault circuit interrupter is not permissible against indirect contact as the only protective measure. This applies for the complete line supply protected by the ground-fault circuit interrupter. If the power supply is operated between line conductors L1 and L2 and an RCD is used as protection against direct or indirect contact, then only an AC/DC-sensitive RCD type B is permitted.
Siemens image is for reference only product style, specific data of manufacture and product version, please refer to the actual product delivery!
We are specialized in providing world-reknowed brands: All-en Bradley, A-BB , Bently Nevada, GE ,Honeywell,Emerson, Triconex , Hima ,etc. Even some discontinued ones.We pride ourselves on being a leading provider of industrial automation parts and solutions. Extensive Inventory, Competitive Pricing, Fast Delivery, Global Reach and serves a diverse range of industries with 12 month warranty. Contact us today to learn more about how we can support your business needs.
We have a large inventory of spare parts for industrial control systems. Manufacturers cover a wide range and also work with a wide range of suppliers.Fast shipping to provide you with the best solution to meet your urgent needs If we don't have the stock request quotation you need, You can contact Sales Manager Stella help you.
Q: Is your product new or refurbished?
A: All our products are original new with one year warranty.
Q: How many days the goods will arrive my hands if I place the order now?
A: As soon as we receive the payment, I will ship the products immediately.
It usually take 3-5 days from China to your hands.
Q: Could you give me some discount?
A: Contact Stella to get more discount for 6EP3337-8SB00-0AY0
Q:Can you ship the goods to my country?
A: Pls don't worry ,We can ship the goods to worldwide
Q:What payment mothod we used?
A:We usually use T/T (Telegraphic Transfer),and we can received with in 1-2days
Q:Can I contact you on Email?
A: You can contact me online to get my email add
| Siemens | 6ES7 131-4BD01-0AA0 | Siemens | 6ES7 131-7RF00-0AB0 | Siemens | 6GK5008-0BA10-1AB2 |
| Siemens | 6ES7 132-4BD02-0AA0 | Siemens | 6ES7 134-4JB50-0AB0 | Siemens | 6ES7 313-5BG04-0AB0 |
| Siemens | 6ES7 193-4JA00-0AA0 | Siemens | 6ES7 392-1AM00-0AA0 | Siemens | 6ES7 134-7TD50-0AB0 |
| Siemens | 6ES7 193-6PA00-0AA0 | Siemens | 6ES7 193-4CA50-0AA0 | Siemens | 6ES7 193-4CA20-0AA0 |
| Siemens | 6ES7 193-6BP00-0DA0 | Siemens | 6ES7 134-4JB51-0AB0 | Siemens | 6ES7 131-6BH01-0BA0 |
| Siemens | 6ES7 134-4MB02-0AB0 | Siemens | 6ES7 195-7HB00-0XA0 | Siemens | 7MH4910-0AA01 |
| Siemens | 6ES7 135-4FB01-0AB0 | Siemens | 6ES7 193-4CC30-0AA0 | Siemens | 6ES7 513-1AL02-0AB0 |
| Siemens | 6ES7 132-4BD32-0AA0 | Siemens | 6ES7 972-0AA01-0XA0 | Siemens | 6ES7 241-1CH32-0XB0 |
| Siemens | 6ES7 193-6BP00-0BA0 | Siemens | 6ES7 132-4BD01-0AA0 | Siemens | 6ES7 131-4BD01-0AA0 |
| Siemens | 6ES7 134-4GB00-0AB0 | Siemens | 6ES7 133-1BL01-0XB0 | Siemens | 6AV6 648-0BC11-3AX0 |
| Siemens | 6GK5204-2BB10-2AA3 | Siemens | 6ES7 193-1CL00-0XA0 | Siemens | 6ES7 131-4BD00-0AA0 |
| Siemens | 6ES7 151-1AA04-0AB0 | Siemens | 6ES7 392-1AJ00-0AA0 | Siemens | 6ES7 151-1CA00-1BL0 |
| Siemens | 6ES7 193-4CB30-0AA0 | Siemens | 6ES7 132-6BH00-0BA0 | Siemens | 6ES7 322-5HF00-0AB0 |
| Siemens | 6ES7 151-1AA05-0AB0 | Siemens | 6ES7 307-1EA01-0AA0 | Siemens | 6GK7 243-1EX01-0XE0 |
| Siemens | 6ES7 193-4CD30-0AA0 | Siemens | 6ES7 194-3AA00-0BA0 | Siemens | 6ES7 193-4CA40-0AA0 |
| Siemens | 6AV2 123-2MB03-0AX0 | Siemens | 6GK5101-1BB00-2AA3 | Siemens | 6ES7 134-4FB01-0AB0 |
| Siemens | 6SL3255-0AA00-4CA1 | Siemens | 6ES7 131-6BH00-0BA0 | Siemens | 6GK5 208-0BA10-2AA3 |
Amikon sells new and surplus products and develops channels to purchase such products. This website is not approved or endorsed by any of the listed manufacturers or trademarks.
){kind=link}