| Customization: | Available |
|---|---|
| Usage: | PLC MODULE |
| Type: | New and original |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Woodward PLC Module 9905-760 9907-1290 9907-147 9907-167 9907-186 Digital Synchronizer and Load Control Overspeed Protection Digital Governor In Stock
9905-760
Obsolete Modules and Remaining Inventory
The LON LinkNet nodes have been replaced by CANopen-based LINKnet HT nodes. Some inventories of the LON LinkNet obsolete modules are held at Woodward facilities globally. Woodward is offering a final Last Time Buy opportunity for this inventory on as-is and first come first served basis until the inventory is depleted.
Obsolete LON LinkNet Modules
| Product | Upper Level | Description | Quantity on Hand |
| LinkNet | 9905-678 | 6-Ch Analog Input 200 Ohm RTD | 5 |
| LinkNet | 9905-970 | 6-Ch Analog Input 100 Ohm RTD | 1 |
| LinkNet | 9905-966 | 6-Ch Analog Input T/C Fail-high | 24 |
| LinkNet | 9905-967 | 6-Ch Analog Input T/C Fail-low | 2 |
| LinkNet | 9905-968 | 6-Ch Analog Input 4-20 mA w/o 24 V Loop Power | 21 |
| LinkNet | 9905-969 | 6-Ch Analog Input 4-20 mA w/ 24 V Loop Power | 0 |
| LinkNet | 9905-971 | 16-Ch Discrete Input 24 Vdc | 0 |
| LinkNet | 9905-972 | 6-Ch Analog Output 4-20 mA | 1 |
| LinkNet | 9905-973 | 8-Ch Discrete Output 5 A | 1 |
| LinkNet | 9905-760 | Link Termination Resistor | 2 |
| MicroNet | 5466-031 | NETCON I/O CONTROLLER | 19 |
9907-1290
Speed Control-Replacement Selection
Note: The new speed control uses the same manual as the old speed control.
| Old Speed Control | Description | Manual | New Speed Control |
| 8400-010 | ProAct Model II Speed (Non UL Pkg) | 04121 | 8400-059 |
| 8400-015* | ProAct mA Control (0-200 mA Act Out) | 04177 | Special Case-See Note Below * |
| 8400-055 | ProAct Fuel Limit | 04121 | 8400-061 |
| 9905-462 | ProAct Model I Speed | 04121 | 9907-1289 |
| 9905-463 | ProAct Model II Speed | 04121 | 9907-1290 |
| 9905-792 | ProAct Plus 4-20 mA Fuel Limiter | 04121 | 9907-1291 |
* ProAct Speed Control 8400-015 does not need to change. It connects to an intermediate ProAct Driver, which in turn is then connected to the ProAct Actuator. The actuator needs to be matched to a ProAct Driver and not to the 8400-015 ProAct Speed Control. Select a new actuator for use in Driver Applications.
9907-147
Features and Benefits of Woodward GS10 9907-186:
Wide Compatibility: Supports engines with various speed controls, including those accepting ±3 Vdc, 0.5-4.5 Vdc, or PWM input signals.
Seamless Integration: Enables load sharing between engines using non-Woodward controls and those with Woodward electronic controls or load sharing modules. Dual Load-Sharing Modes: Provides both isochronous and droop load-sharing capabilities for flexible operation in generator set applications.
System Compatibility: Designed to work with key Woodward accessories like the SPM-A/D Synchronizer, AGLC, and APTL for extended functionality. Accessory Enablement: Allows the use of other Woodward power generation accessories to enhance overall system control and monitoring.
Vendor Flexibility: Facilitates integration and load management in mixed-control fleets, protecting existing investments while enabling system upgrades.
GS Series gas fuel skid General Information
The Woodward GS Series gas fuel skid is an integrated valve, driver, and pressure- sensing assembly with the ability to meter gas fuel accurately for low-emissions turbines. To achieve accurate gas fuel metering, a digital position demand signal from the supervisory control must be used. The GS Series valve is capable of CANopen digital communications protocols. The GS Series valve flow characteristics are kept within the valve driver onboard the unit. The position demand from the supervisory control is generated by a calculation based on the pressures, temperature, and other properties of the gas fuel. The pressures are received from the Woodward Smart Pressure Transducer manifold affixed to the fuel skid. The pressure transmitter sends the pressure data digitally via a RS-422 protocol to the supervisory control.
GS Series gas fuel skid Installation
ANSI/ASME Flanges-Inlet Connection
Inlet connection fastener material must meet or exceed ASTM A193 Grade B7 per ASME B16.5. The use of thread anti-galling lubricant is required on all bolted connections. The use of helical split washers is recommended. Flange gasket materials should conform to ASME B16.20. Type CGI gaskets must be used on the inlet connection. The user should select a gasket material which will withstand the expected bolt loading without injurious crushing, and which is suitable for the service conditions. When installing the skid into the process piping, it is important to properly torque the studs/bolts in the appropriate sequence to keep the flanges of the mating hardware parallel to each other. A two-step torque method is recommended. Rated torque for the inlet connection is (108 to 122) N.m / (80 to 90) lb.-ft. Once the studs/bolts are hand-tightened, torque the fasteners in a crossing pattern illustrated in Figure 2-1, to half the required torque value. Once all studs/bolts have been torqued to half the appropriate value, repeat the pattern until the rated torque value is obtained.
Figure 2-1. Bolt Tightening Sequence
GS Series Maintenance
Maintenance is not required for the GS Series valve; however, periodic cleaning may be performed. A petrochemical solvent is recommended to clean the valve by washing and brushing. High-pressure power washing is not recommended. When cleaning the metering element and the inside of the valve body, do not use sharp objects that may scrape or dent the metering element, as this could degrade the accuracy of the valve. When using solvent or water to clean the valve, be certain that all access points into the enclosure are closed or covered (electronics cover, conduit entry, OBVD port).
9907-167 image is for reference only product style, spec ific data of manufacture and product version, please refer to the actual product delivery!
Q: Is your product new or refurbished?
A: All our products are original new with one year warranty.
Q: How many days the goods will arrive my hands if I place the order now?
A: As soon as we receive the payment, I will ship the products immediately.
It usually take 3-5 days from China to your hands.
Q: Could you give me some discount?
A: Contact Stella to get more discount for 9907-147
Q:Can you ship the goods to my country?
A: Pls don't worry ,We can ship the goods to worldwide
Q:What payment mothod we used?
A:We usually use T/T (Telegraphic Transfer),and we can received with in 1-2days
Q:Can I contact you on Email?
A: You can contact me online to get my email addAmikon sells automation equipment around the world. With a strong focus on older, obsolete, Automation parts, we pride ourselves in providing high quality parts and services to our customers. Our goal is to provide a seamless purchasing experience that trumps the competition. Low lead time, with quick shipping and processing is our utmost concern. Reducing downtime is extremely important to us and our customers take notice! All orders are prepared by our expertly-skilled team and thoroughly vetted before each shipment.
We are specialized in providing world-reknowed brands: All-en Bradley, A-BB , Bently Nevada, GE ,Honeywell,Emerson, Triconex , Hima ,etc. Even some discontinued ones.We pride ourselves on being a leading provider of industrial automation parts and solutions. Extensive Inventory, Competitive Pricing, Fast Delivery, Global Reach and serves a diverse range of industries with 12 month warranty. Contact us today to learn more about how we can support your business needs.
We have a large inventory of spare parts for industrial control systems. Manufacturers cover a wide range and also work with a wide range of suppliers.Fast shipping to provide you with the best solution to meet your urgent needs If we don't have the stock request quotation you need, You can contact Sales Manager Stella help you.
| Woodward | 9904-060 | Woodward | 9907-135 | Woodward | 9907-186 |
| Woodward | 9905-799 | Woodward | 9907-028 | Woodward | 9907-162 |
| Woodward | 9905-768 | Woodward | 9905-860 | Woodward | 8406-003 |
| Woodward | 9905-376 | Woodward | 9907-076 | Woodward | 5466-352 |
| Woodward | 9905-211 | Woodward | 9907-031 | Woodward | 9905-969 |
| Woodward | 9905-068 | Woodward | 9907-345 | Woodward | 9907-827 |
| Woodward | 9907-361 | Woodward | 9905-020D | Woodward | 8273-140 |
| Woodward | 9904-061 | Woodward | 9905-180 | Woodward | 5466-411 |
| Woodward | 9907-175 | Woodward | 9905-797 | Woodward | 9905-970 |
| Woodward | 9905-972 | Woodward | 9905-463 | Woodward | 9905-973 |
| Woodward | 9907-624 | Woodward | 9907-164 | Woodward | 8405-009 |
| Woodward | 9907-005 | Woodward | 8200-1302 | Woodward | 5501-214 |
| Woodward | 9905-760 | Woodward | 5466-1035 | Woodward | 9907-167 |
| Woodward | 9907-996 | Woodward | 9905-068 | Woodward | 9905-387 |
| Woodward | 9907-774 | Woodward | 9907-028 | Woodward | 8400-016 |
| Woodward | 9907-826 | Woodward | 8406-113 | Woodward | 5501-365 |
| Woodward | 9905-377 | Woodward | 5466-318 | Woodward | 9907-205 |
| Woodward | 9907-014 | Woodward | 9905-860 | Woodward | 9907-031 |
| Woodward | 8405-809 | Woodward | 8440-1831 | Woodward | 8440-1750 |
| Woodward | 5501-367 | Woodward | 5501-470 | Woodward | 5503-198 |
| Woodward | 5453-754 | Woodward | 5464-648 | Woodward | 5466-253 |
| Woodward | 5453-759 | Woodward | 8200-226 | Woodward | 9907-147 |
){kind=link}