| Customization: | Available |
|---|---|
| Usage: | PLC MODULE |
| Type: | New and original |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
WOODWARD PLC Module 5464-654 5464-653 5464-335 5466-354 5437-672 5438-667 Discrete Output Module Netcon Field Terminal Module
5464-654
5464-654 FAQ:
•Q1: What is the Woodward part number 5464-654?
A1: It is a 32-channel Discrete Output Module for the MicroNet control system.
•Q2: Does this output module require calibration?
A2: No, it lacks potentiometers and does not require any calibration.
•Q3: How is the module secured inside the control chassis?
A3: It slides into card guides and is fastened with two screws on its front panel.
•Q4: How do you safely remove the module from the chassis?
A4: Toggle the top and bottom handles outward to disengage it, then pull it out.
•Q5: How does the module control external relays?
A5: It receives digital commands from the CPU and generates non-isolated relay driver signals for Woodward relay modules.
5464-653 5464-335 5466-354
The CPU 040/060 Modules were used as the main processor for NetCon™/MicroNet platforms until the early 2000's, and on the 040 TMR product line until 2009. This functionality has been replaced by newer CPUs, and the old designs are no longer feasible to produce due to component obsolescence. The item numbers of the replacement products are listed below. Converting a NetCon system to the new CPUs will require application software updates, Chassis replacement, Power Supply replacement, and may require I/O module updates. See MicroNet Plus product specification 03333 and product manuals 26166V1 & 26166V2 for information on the replacement modules. Converting a MicroNet system to the new CPUs will require application software updates and may require I/O module updates. See MicroNet Plus product specification 03333 and product manuals 26166V1 & 26166V2 for information on the replacement modules. TMR systems will require replacement of all of the CPUs and Kernel Power Supplies and may require I/O module updates. See product specification 03363 and product manuals 26167V1 & B26167V2 for information on replacement modules. See the 5009FT Upgrade Kit manual 26593 for instructions on upgrading these systems.
| Item Number | CPU Assembly w/ Application Software | Description |
| 5437-050 | DOOR - NETCON 3B SIMPLEX MAIN VFD | |
| 5453-203 | PANEL-DISPLA Y | |
| 5501-340 | BOARD - NETCON SERIAL VFD | |
| 5466-318 | MODULE - MICRONET TMR KERNEL P.S. | |
| 5466-353 | MODULE - NETCON MAIN CHASSIS TRANSCEIVER | |
| 5466-354 | MODULE - NETCON REMOTE CHASSIS TRANSCEIVER | |
| 5466-355 | MODULE - NETCON REMOTE CHASSIS TRANSCEIVER |
5437-672
Output Modules
| Output Modules | ||||
| Description | Part Numbers | Notes | Field Termination Modules | Cable Selection Table |
| Actuator Driver - 2 channel +/-12.25 mA Integrating or Proportional (software selectable) Outputs | 5501-1428 | Bi-Polar ( + ) Actuator Driver | 5437-672 | Table K |
| Actuator Driver - 2 channel +/- 30 mA Integrating or Proporti on al (software selectable) Outputs | 5501-1429 | Bi-Polar ( + ) Actuator Driver | 5437-672 | Table K |
| Actuator Driver - 2 channel +/- 60 mA Integrating or Proporti on al (software selectable) Outputs | 5501-1430 | Bi-Polar ( + ) Actuator Driver | 5437-672 | Table K |
| Actuator Driver - 2 channel +/-120 mA Integrating or Proportional (software selectable) Outputs | 5501-1431 | Bi-Polar ( + ) Actuator Driver | 5437-672 | Table K |
| Actuator Driver - 2 channel +/- 245 mA Integrating or Proporti on al (software selectable) Outputs | 5501-1432 | Bi-Polar ( + ) Actuator Driver | 5437-672 | Table K |
| Real Time SIO - Connects to GS/LQ & EM Drivers | 5503-267 | Uses screw post connectors. Use with LQ Driver & EM Digital. Multidrop is not allowed with this module. | ||
5437-672
FREQUENTLY ASKED QUESTIONS:
•Q1: What is the function of the Woodward part number 5438-667?
A1: It is a Field Terminal Module (FTM) that serves as an interface between field devices and the central control system.
•Q2: What is the operating voltage for the 5438-667 module?
A2: It is designed to operate on a standard 24VDC input power supply.
•Q3: How is the 5438-667 module physically secured in a rack or chassis?
A3: It is typically mounted using screws or latches on its front panel to ensure a secure connection within the chassis.
•Q4: Does the module provide any local indication or control?
A4: Yes, it features an LED display for status information and includes functional buttons for operator interface.
•Q5: Is the 5438-667 module available for purchase and replacement?
A5: Yes, it is generally kept in stock and can be directly replaced with another module of the same part number.
LINKnet 8 Channel Discrete Output Module
1-Module Description
The LINKnet 8 Channel Discrete Output (DO) Module provides eight 5 amp form C relay outputs. An internal set of relay contacts is fed back to the module
processor, for read back status. The read backs are compared with the desired outputs, and a status annunciated for each relay in the application program. The
relay output module has a watchdog that monitors the communications with the module processor, and disables the relay drivers upon a loss of communications
of more than 1.2 seconds.
Figure 11-21-LINKnet 8 Channel Discrete Output Module
2-Module Specification
Table 11-13. LINKnet 8 Channel Discrete Output Module Specification
•Number of Outputs: 8 (form C relay outputs)
•Ratings: 5.0 A @ 28 Vdc resistive
•0.5 A @ 115 Vac resistive
Figure 11-22-LINKnet Relay Contacts Power Supply Input: 18 to 32 Vdc
Power Required: 5.0 Watts at 24 Vdc
3-Isolation
Table 11-14. LINKnet 8 Channel Discrete Output Module Isolation
Network to I/O channel: 277 Vac
Power supply input to network: 277 Vac
PS input to I/O channel: 500 Vdc
Field Wiring: 14 AWG maximum wire size
Ambient Temperature Range: -40 to +55 °C
4-Installation
Install the LINKnet 8CH Discrete Output Module on the DIN rail and connect to the appropriate LINKnet network and 24 Vdc power. Wire the discrete outputs
per Figure 11-23. Set module address one's and ten's rotary switches per application setup. The LINKnet system accommodates hot-replacement of faulty nodes. When replacing a node, the network cable connections must remain intact. A faulty node can be removed from the network by pulling both terminal blocks out of their headers, and removing the node from the DIN rail. The address switches of the replacement node should be set to match those of the faulty node. The
replacement node can then be mounted on to the DIN rail, and the terminal blocks pushed into the headers. It is then necessary to reset the node through the application program to reinitiate communications with the LINKnet controller module and to clear the "no message" fault.
Figure 11-23-LINKnet 8CH DO Module Wiring
5466-354 image is for reference only product style, spec ific data of manufacture and product version, please refer to the actual product delivery!
Q: Is your product new or refurbished?
A: All our products are original new with one year warranty.
Q: How many days the goods will arrive my hands if I place the order now?
A: As soon as we receive the payment, I will ship the products immediately.
It usually take 3-5 days from China to your hands.
Q: Could you give me some discount?
A: Contact Stella to get more discount for 5437-672
Q:Can you ship the goods to my country?
A: Pls don't worry ,We can ship the goods to worldwide
Q:What payment mothod we used?
A:We usually use T/T (Telegraphic Transfer),and we can received with in 1-2days
Q:Can I contact you on Email?
A: You can contact me online to get my email addAmikon sells automation equipment around the world. With a strong focus on older, obsolete, Automation parts, we pride ourselves in providing high quality parts and services to our customers. Our goal is to provide a seamless purchasing experience that trumps the competition. Low lead time, with quick shipping and processing is our utmost concern. Reducing downtime is extremely important to us and our customers take notice! All orders are prepared by our expertly-skilled team and thoroughly vetted before each shipment.
We are specialized in providing world-reknowed brands: All-en Bradley, A-BB , Bently Nevada, GE ,Honeywell,Emerson, Triconex , Hima ,etc. Even some discontinued ones.We pride ourselves on being a leading provider of industrial automation parts and solutions. Extensive Inventory, Competitive Pricing, Fast Delivery, Global Reach and serves a diverse range of industries with 12 month warranty. Contact us today to learn more about how we can support your business needs.
We have a large inventory of spare parts for industrial control systems. Manufacturers cover a wide range and also work with a wide range of suppliers.Fast shipping to provide you with the best solution to meet your urgent needs If we don't have the stock request quotation you need, You can contact Sales Manager Stella help you.
| Woodward | 8440-1750 | Woodward | 5453-203 | Woodward | 5462-744 |
| Woodward | EASYGEN-1500-55B | Woodward | 5437-672 | Woodward | 9907-164 |
| Woodward | 9905-003 | Woodward | 5464-210 | Woodward | 8271-467 |
| Woodward | SA1509-24 | Woodward | 5466-353 | Woodward | 9905-068 2301A |
| Woodward | EASYGEN-2500-5 | Woodward | 5466-355 | Woodward | 9905-792 |
| Woodward | 9905-463 | Woodward | 5461-655 | Woodward | CMW112 |
| Woodward | 5463-785 | Woodward | 5461-648 | Woodward | 8200-226 |
| Woodward | 5463-473 | Woodward | 5461-644 | Woodward | EASYGEN-1000 |
| Woodward | 5464-414 | Woodward | 5462-718 | Woodward | 8440-1809 |
| Woodward | 5464-544 | Woodward | 9907-029 | Woodward | 9907-028 |
| Woodward | 5463-581 | Woodward | 5462-757 | Woodward | 5438-667 |
| Woodward | 5464-013 | Woodward | 5462-948 | Woodward | 5464-643 |
| Woodward | 5464-211 | Woodward | 5462-408 | Woodward | 5464-648 |
| Woodward | 5417-028 | Woodward | 5500-577 | Woodward | 5464-653 |
| Woodward | 5501-380 | Woodward | 5462-916 | Woodward | 5464-850 |
| Woodward | 5417-175 | Woodward | 5462-758B | Woodward | 5466-026 |
| Woodward | 5417-040 | Woodward | 5461-650 | Woodward | 5466-352 |
){kind=link}