STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A-BB PCD Control, I/O and Synchronizing ModulesPCD230A 3BHE022291R0101 · PCD235 A101 3BHE032025R0101 · PCD530 A102 3BHE041343R0102 |
This page groups three A-BB electronic modules for inquiry convenience. A-BB identifies 3BHE022291R0101 as PC D230 A: PEC80-CCM, 3BHE032025R0101 as PC D235 A: PEC80-CIO FU, and 3BHE041343R0102 as PC D530 A102: Comm. Contr. & Meas. (CCM). The first two use A-BB PEC80 designations; A-BB lists the third under Power Conversion & Control, Automatic Synchronizers and SYNCHROTACT.
| Complete product ID | A-BB designation | Selection meaning |
|---|---|---|
| 3BHE022291R0101 PCD230A / PC D230 A |
PEC80-CCM | Communication/control module role; confirm the exact installed system documentation. |
| 3BHE032025R0101 PCD235 A101 / PC D235 A |
PEC80-CIO FU | Combined I/O functional-unit role; not a substitute for the other two groups. |
| 3BHE041343R0102 PCD530 A102 / PC D530 A102 |
Communication, Control & Measurement (CCM) | SYNCHROTACT synchronizing equipment context; verify project revision and interface requirements. |
| Buyer must confirm: full A-BB product ID, board marking, hardware revision, host system, connector/interface arrangement and required documentation. Similar PCD names do not establish interchangeability. |
A-BB identifies PCD230A as PEC80-CCM and PCD235 A101 as PEC80-CIO FU. The product view illustrates the AC 800PEC controller-family context. PCD530 A102 belongs to a separate SYNCHROTACT communication, control and measurement context and must be checked independently.
1. Photograph the complete nameplate and installed connector area. 2. Record the full 3BHE product ID and every suffix. 3. Identify whether the request concerns PEC80 control/I/O or SYNCHROTACT synchronizing equipment. 4. Compare project drawings and the original bill of materials. 5. Ask for a written quotation against the exact code rather than a shortened family name.
The table below separates product-specific facts from A-BB platform context. Only the A-BB descriptions tied to the three complete product IDs are treated as product-specific. AC 800PEC performance figures describe the controller family and must not be interpreted as guaranteed electrical ratings for every PCD module.
| Data level | Verified information | How the buyer should use it |
|---|---|---|
| Product identity | A-BB product IDs and descriptions listed in the Model Overview table. | Use as the primary commercial and receiving reference. |
| AC 800PEC family context | A-BB describes short cycle times down to 100 μs, high processing power, fast communication and I/O, FPGA functions, optical communication and integration with System 800xA. | Use for architecture understanding only; confirm the purchased module's exact project-specific implementation. |
| Performance levels | A-BB's brochure separates very fast tasks down to 25 ns, fast tasks down to 100 μs and slow tasks down to 1 ms. | These are controller-platform levels, not an individual module nameplate rating. |
| Connectivity | A-BB presents native and add-on connectivity dependent on configuration. | Confirm enabled protocol, physical port and project software before ordering. |
The official A-BB platform diagram separates very fast FPGA processing, fast control tasks and slower application tasks. Use it to understand system architecture only; it does not provide an individual module electrical rating.
AC 800PEC combines processor computing with FPGA-based fast functions and provides scalable compact, standard and modular arrangements. A-BB's brochure also distinguishes integrated fast I/O, external fast I/O and slower I/O paths. These diagrams help an engineer locate the module in the system architecture, but they do not authorize a cross-reference between different PCD product IDs.
A-BB presents compact, standard and modular AC 800PEC arrangements. During replacement planning, identify the actual processor, fast-I/O path, external I/O and project configuration before matching any PCD assembly.
For project review, document the supervisory system, service connection, optical or electrical I/O path, fieldbus module and any CEX-bus or Powerlink devices actually present. The correct replacement decision is based on the as-built project, configured firmware and connector arrangement, not merely on the presence of an A-BB logo.
A-BB shows native and optional network paths across the controller platform. Confirm the configured protocol, physical interface, fieldbus option and engineering project; a similar connector does not prove compatibility.
| Identity first Match the 3BHE code, PCD designation and suffix character by character. |
Function second Separate communication/control, combined I/O and synchronizing measurement duties. |
Project proof Check drawings, cabinet position, connector map, firmware and configuration records. |
Installation must be carried out by qualified personnel using the applicable A-BB product manual, project drawings and site safety procedure. The steps below are a procurement and commissioning checklist; they intentionally do not invent torque values, clearances, supply ratings or wiring details.
| Stage | Required check | Release criterion |
|---|---|---|
| 1 · Receive | Inspect packaging, compare product ID and suffix, photograph board condition and connectors. | No unexplained identity or physical-condition discrepancy. |
| 2 · Install | Isolate energy, apply ESD controls, confirm slot/location and follow the project connector map. | Mechanical fit and wiring agree with approved drawings. |
| 3 · Commission | Restore power under procedure, monitor status indications, confirm communication and validate affected control/measurement points. | No active fault, stable communication and documented functional test. |
Follow a controlled sequence: specify the exact hardware, simulate or review the control design, implement against approved drawings, test affected signals and commission with documented acceptance criteria.
| Commissioning hold point: do not energize an unverified module. A matching connector shape does not prove the correct electrical function or software compatibility. |
Use status information and project diagnostics to isolate the fault before replacing hardware. Preserve the original module and configuration data until the root cause is documented.
| Observed condition | Check first | Controlled action |
|---|---|---|
| Module not recognized | Product ID, cabinet position, connectors, host configuration and approved firmware record. | Restore the documented configuration; escalate any suffix mismatch before substitution. |
| Communication unavailable | Physical link, configured protocol, addressing, fieldbus option and upstream controller diagnostics. | Correct the documented link issue, then perform an end-to-end communication test. |
| Input or measurement discrepancy | Project scaling, terminal assignment, sensor loop, reference source and diagnostic log. | Compare against a known reference and replace hardware only after external causes are excluded. |
| Intermittent event | Connector seating, grounding/EMC practice, thermal history, vibration history and event timestamps. | Capture evidence, correct the verified cause and repeat the monitored functional test. |
| PEC80 communication/control PCD230A inquiries should be checked against the AC 800PEC project communication and control architecture. |
PEC80 combined I/O PCD235 A101 inquiries concern a different combined-I/O function and require the correct project I/O documentation. |
SYNCHROTACT CCM PCD530 A102 is associated by A-BB with automatic synchronizing equipment for communication, control and measurement. |
The official architecture figure provides application context for power-conversion control. It must not be read as a guarantee that PCD530 A102 fits every excitation or synchronizing installation; verify the as-built project and A-BB documentation.
For installed-base support, record the removed unit's complete identification, installation position, fault history and configuration before sourcing a replacement. Keep the original project archive, parameter set and acceptance record with the maintenance file. Availability or visual similarity must never be described as compatibility.
Confirm the approved enclosure, ambient limits, contamination level, EMC/grounding method, ESD procedure and isolation practice from the applicable A-BB and site documentation. If any condition is unknown, stop and obtain the correct manual or project drawing before installation.
To receive an accurate quotation, send the complete A-BB product ID, PCD designation, visible revision, quantity, destination country and required delivery date. A clear nameplate photo and cabinet-position photo allow the sales and engineering teams to identify questions before shipment.
| Request a quote for the exact A-BB code 3BHE022291R0101 · 3BHE032025R0101 · 3BHE041343R0102 |
Q: Are the three PCD groups direct replacements?
A: No replacement relationship is stated. They have different A-BB descriptions and must be selected by complete product ID and project documentation.
Q: What information is needed for an accurate quotation?
A: Please provide the full 3BHE code, PCD designation, visible revision, quantity, destination and required delivery date.
Q: Can electrical ratings be confirmed from the family name?
A: No. Exact ratings, connectors and configuration must be checked against the applicable A-BB manual and the installed project.
Amikon sells automation equipment around the world. With a strong focus on older, obsolete, Automation parts, we pride ourselves in providing high quality parts and services to our customers. Our goal is to provide a seamless purchasingexperience that trumps the competition. Low lead time, with quick shipping and processing is our utmost concern. Reducing downtime is extremely important to us and our customers take notice! All orders are prepared by our expertly-skilled team and thoroughly vetted before each shipment.
We are specialized in providing world-reknowed brands: All-en Bradley, A-BB , Bently Nevada, GE ,Honeywell,Emerson, Triconex , Hima ,etc. Even some discontinued ones.We pride ourselves on being a leading provider of industrial automation parts and solutions. Extensive Inventory, Competitive Pricing, Fast Delivery, Global Reach and serves a diverse range of industries with 12 month warranty. Contact us today to learn more about how we can support your business needs.
We have a large inventory of spare parts for industrial control systems. Manufacturers cover a wide range and also work with a wide range of suppliers.Fast shipping to provide you with the best solution to meet your urgent needs If we don't have the stock request quotation you need, You can contact Sales Manager Stella help you.
| Recommended Models | |||||||
|---|---|---|---|---|---|---|---|
| 16D45 | GJR2340200R1 DT384A 9081/011 | XBTOT2110 395750 | PN:10827154 | A-BB BE/S 8.24.1 2CDG110055R0011 | SENSUS 04410580 | A-BB FCA/S 1.1.2.2 2CDG110194R0011 | CLEA2026B31 |
| FW-08 | V5862A3011 | B-14MRA | 176F2129 | GE IC200CBL001A | R7849 A 1023 | UB3-434 | BMXDDI3202K |
| CAB-HDMI-PHD12XS | 6ED1052-1CC01-0BA8 6ED1055-1CB10-0BA2 | 6EP8090-0CA00 | GE CR123H055A | NR300 A301430 | DNC3102-B4RP10B | EM-07K | rdc485fo-dv-2p-st-c |
| K&M 25200 | 1U8865 | 6SY70000AA83 | 3216i | 5WG1 512-1AB01 | FK588 | SGDH-04AE | 02A00H050 |
| TPRX-K12-HD | 080M02000JNDAF | GE 430209003 T-500SW | 1350/D2F3D1B5C000 | QND-6082R | BMXDDO6402K | SAVS48EU3 | ECP-300 |
| Recommended Models | |||||||
|---|---|---|---|---|---|---|---|
| PCX924 | BKM-16R | CHM-378 | RWD32 | TSXRKZ02 TSXASZ200 TSXAEZ802 | P648U Cat6 | EC3-X32 | A-BB 2CSYD0202B 2CSY290962R0202 |
| ST6917-122-00 | UDS1100002-01 08-358-013-R | ZWD020/DM | 7NG4021-6AA33-0NN0 | A-BB 733A095B-1 | SPS 201 A | DM-NVX-350 6508251 | LEMO14(5m)LDO-BB |
| PW482-50 | PP056TB1-443 | ED-SxED 22176716 | SPI-10A | DRC820F | MPH-AC001A 293667787 | 084053 HDP5000 | 130B1169 |
| F4111A | 47896C-3 PR15-083644M | XTCE018C01 M17-01 | S4000CH 32425-14 | A-BB GJR2237600R1 DT370A 9090/076 | 3500R1B06B1Bezzz | B501-IV | RD112 88.B6104X |
| AN-60012MA | MLP41TNA | SF61B | 1756-IF8 | IDS 850 NG851 | FC-TSDI-16UNI | iQEC035-1201U50004 | BAC-5051E |
| Recommended Models | |||||||
|---|---|---|---|---|---|---|---|
| 6FL4301-3CA11 6FL43013CA11 | CSE-200 | 6SE6400-0AP00-0AA1 | HI6100405 | FO-10 | KXA-GPI-GEN-R 0798-9700-302 | NI9977 196917B-01L | 1-XR4-433C |
| CW-ANT-O1-NS-00 CW9163 | LP-XP91D04-000C | 2TME050080N0001 | HIC2822 | OT115/R | MILLENIUM3 CD12 | 216-0BA00-2AA3 | KA/D 0403.1 |
| 181737 RL28-55-LAS-2840/47/115b | HLM45V13MPD | PH-2,64437100 BP-2002 | IC693ALG442-EB | 26410R5WB2DA1G | 140CPU31110 | TRIO-PS-2G/1AC/24DC/10 | 171CCC78010 170ADI34000 |
| A-BB TB521-ETH 1sap112100r0270 | EP1502 10383 0 | 8431M-1 | MPC-M25-W 6502449 | PM-7200-8TX | MH192 | DT70-F002E | POL965.00 |
| GE MM300 | IP505R | VROM-160 D59B 74158 | FC-TAOH-0220M | APIN0305 IAP-305-RW | 390EVO | A-BB 7B4618G04 | KFA6-SR2-EX2.W 103373 |
Amikon sells new and surplus products and develops channels to purchase such products. This website is not approved or endorsed by any of the listed manufacturers or trademarks.
Amikon is not an authorized distributor, distributor or representative of the products displayed on this website. All product names, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions and sales references are used for identification purposes only and do not indicate association with or authorization from any rights holder.
){kind=link}